Construction
Agile response — making every collaboration reliable. Download our product catalog for detailed specifications.
Steel Pipe Hook for Euro Formwork System
Steel pipe hook for Euro Form formwork system. Made of Q235 steel with painted or galvanized finish. Available in round and square types, large hook and small hook sizes. Used to connect formwork pipes to Euro Form panels, creating a complete wall formwork system. Compatible with 48.3mm scaffold tubes and wedge pins. Suitable for wall concrete construction.
Galvanized Doka Type Formwork Connecting Pin 10cm
Galvanized Doka type formwork connecting pin 10cm for securing plates and accessory parts to multi-purpose walings. Length 14cm. Compatible with Doka Framax, Top100 tec, and Dokadek formwork systems. Used with spring cotter 5mm for secure locking. OEM and bespoke manufacturing available.
Galvanized Cast Steel Formwork Gravity Lock Pin
Galvanized cast steel formwork gravity lock pin for securing diagonal braces and frame connections in formwork support systems. Made of cast steel with hot-dip galvanized finish. Gravity-activated locking mechanism drops into position automatically to prevent accidental release. Compatible with formwork support frames and scaffolding systems. Also known as pig tail pin or G pin.
Plastic Cone Sleeve 30cm for Concrete Formwork
Plastic cone sleeve 30cm for concrete formwork tie rod systems. Made of PVC/ABS/POM with inner diameter 18mm. Used to create a conical hole in concrete walls, allowing easy removal of tie rods after formwork stripping. Prevents concrete from adhering to tie rods and protects formwork panels. Reusable up to 100 times. Compatible with D15/17mm and D20mm tie rod systems. Available in red, black, yellow, green, blue, orange, and white.
Single Waler Bracket for Plywood Formwork
Single waler bracket for plywood formwork systems. Key component of the single waler forming method, used to hold a single horizontal wale or vertical stud against the form panels. Made of heavy gauge steel with cadmium plating or hot-dip galvanizing for corrosion resistance. Sliding wedge provides 5/8" adjustment range for minor lumber variation. Compatible with 4-3/4" L&W snap ties. Can be installed horizontally, vertically, or inverted with a 2x4 kicker plate. Used in concrete wall forming for commercial and residential construction.
Stamping Spring Rapid Clamp for Russian Formwork
Stamping spring rapid clamp for Russian formwork systems. Also known as пружинный зажим (pruzhinnyy zazhim) in the Russian market. Made of Q235 carbon steel with hardened 65Mn spring steel tongue. Base thickness 3–3.5mm, reed thickness 5–6mm. Load capacity 2100–2500 kg. Compatible with 6–10mm rebar rods. Surface treatment: galvanized tongue with powder-coated body. Quick installation without bolts or nuts, reducing setup time by up to 40%. Suitable for wall, column, and foundation formwork in monolithic construction.
12/15/18mm PP Hollow Plastic Concrete Formwork Panel
PP hollow plastic concrete formwork panel available in 12mm, 15mm, and 18mm thicknesses. Made of 95% polypropylene with hollow-core construction for exceptional strength-to-weight ratio. Standard size 1220×2440mm and 915×1830mm, customizable. 100% waterproof, no release oil required, and reusable 80–100 times. Compatible with wood, steel, and aluminum formwork systems. Suitable for wall, slab, and column concrete construction.
Concrete Formwork Snap Tie with Plastic Cone for Plywood
Concrete formwork snap tie with plastic cone for plywood forming systems. Manufactured from high-strength steel wire with a bolt head or button protrusion on both ends. Two plastic cones held a fixed distance apart control the wall thickness by bearing against the forms. Nominal 1" breakback allows the tie end to be snapped off after concrete curing. Anti-turn device ensures proper break after use. Compatible with plywood and modular form systems. Available in 6", 8", 10", 12", 16", 18", 20", 24" wall thickness. Short end (4-3/4") and long end (8-1/4") configurations available. Galvanized, electro-galvanized, or painted finish. Used with snap tie wedges and Jahn A/C brackets for single waler forming systems.
Galvanized Steel A43 Footing Tie for Concrete Formwork
Galvanized steel A43 footing tie for concrete formwork systems. Manufactured from high-strength steel with galvanized finish for corrosion resistance. Used to form footers or grade beams up to 48" (1219mm) wide. Provides an economical way to support concrete forms from bowing or collapsing while concrete is being poured[reference:1]. Available in 12", 14", 16", 18", 20", 24", 30", and 36" lengths[reference:2]. Compatible with standard plywood form panels and form accessories.
Hot-Dip Galvanized Ground Screw Pile for Photovoltaic and Greenhouse
Hot-dip galvanized ground screw pile for photovoltaic mounting, greenhouse construction, and viewing deck foundations. Made of Q235 carbon steel with hot-dip galvanized coating (80-100μm) for excellent corrosion resistance. Available in diameters 48–140mm, lengths 550–6000mm, with customizable sizes. Installed by rotating into the ground without excavation or concrete, providing immediate load-bearing capacity. Suitable for solar farms, greenhouses, boardwalks, and light structures.
We undertake custom OEM/ODM projects to meet diverse global customer needs.
Contact Us
Ms. Sun Zhiying
Room 609, Zhejiang Building, No. 8 Wangjing Road, Wanbailin District, Taiyuan City, Shanxi Province, China
privacy policy Powered by 300.cn
