The Iron-Carbon Phase Diagram: A Map of the Steel World
Release time:
2026-11-18
Author:
Source:
Summary
The Iron-Carbon Phase Diagram: A Map of the Steel World
The iron-carbon phase diagram is a map that tells you, for any carbon content and temperature, exactly what structure a steel or cast iron will have. Four points — S at 727°C, C at 1148°C, E at 2.11% and P at 0.0218% — plus three key lines define every transformation.
1. How to read the diagram
The horizontal axis is carbon content (wt%, from 0 to 6.69%) and the vertical axis is temperature. Every line and intersection marks a phase transformation — a critical condition where atomic arrangement changes.
Note first: the diagram in common use is the metastable Fe-Fe₃C diagram (carbon as cementite); all heat treatment, quenching and annealing rely on it. A separate stable Fe-C diagram (carbon as graphite) is used mainly for cast iron.
2. The three basic phases
Ferrite F (α-Fe): body-centered cubic, very soft and tough, but dissolves almost no carbon — 0.0218% max at 727℃, only 0.0008% at room temperature — like soft clay. Austenite A (γ-Fe): face-centered cubic, exists only at high temperature, extremely ductile, dissolves up to 2.11% carbon — steel is forgeable only in this state, like warmed dough. Cementite Fe₃C: an iron-carbon compound with 6.69% carbon, extremely hard and brittle, like broken glass in dough — it supplies hardness.
3. Four critical points and three key lines
Four points (values per standard textbooks):
Point | Temp | Carbon | Meaning |
S eutectoid | 727°C | 0.77% | Austenite decomposes into ferrite+cementite = pearlite; A1 temperature |
C eutectic | 1148°C | 4.3% | Liquid crystallizes into austenite+cementite = ledeburite; best casting point |
E | 1148°C | 2.11% | Max carbon solubility in austenite; steel/cast-iron boundary |
P | 727°C | 0.0218% | Max carbon solubility in ferrite |
Three lines: PSK (A1, 727°C) — all steels undergo eutectoid transformation to pearlite here. GS (A3) — temperature where hypoeutectoid steel begins to precipitate ferrite on cooling. ES (Acm) — line where hypereutectoid steel precipitates secondary cementite.
4. How carbon content changes microstructure
Reading the steel region from left to right:
Hypoeutectoid steel (0.0218–0.77%): room-temperature structure is ferrite + pearlite; more carbon means more pearlite and a harder steel. Eutectoid steel (0.77%): all pearlite, a good balance of strength and ductility. Hypereutectoid steel (0.77–2.11%): pearlite + secondary cementite; a network of cementite along grain boundaries is brittle, so tool steels need heat treatment to break it up.
In the cast-iron region (>2.11%), compositions near the C point (4.3%) have the lowest melting point and best fluidity, reproducing intricate mold details such as manhole-cover patterns. But high carbon means brittleness: machining only, never forging.
5. The three transformations of cementite
Fe₃C on the diagram often carries Roman numerals. Their chemistry is identical; only their origin differs:
Fe₃CⅠ (primary): crystallizes directly from liquid iron. Fe₃CⅡ (secondary): precipitates from austenite. Fe₃CⅢ (tertiary): precipitates from ferrite below 727℃, in negligible amounts.
Their morphology — coarse blocks, networks, fine particles — directly determines brittleness. This is why identical chemistry can yield wildly different properties after different heat treatments.
Next: Where does the carbon go? Interstitial solution and alloying elements.
Recommended reading
The Iron-Carbon Phase Diagram: A Map of the Steel World
2026-11-18
The "DNA" of Metal: How Crystal Structures Determine Steel's Behavior
2026-11-18
Steel vs. Cast Iron: What the 2.11% Carbon Threshold Really Means
2026-11-18